Datavideo PTC-140TH 2.07MP HDBaseT PTZ Camera with HBT-11 Receiver, 20x Optical Zoom, 60 fps, PoE

PTZ Camera

he PTC-140TH is a cost-effective HDBaseT PTZ camera featuring PoE, a built-in streaming encoder and 20x optical zoom. All signals, power and control data travel through a single CAT6 ("network cable") and can reach a distance up to 100 meters away. The PTC-140TH's on-board streaming encoder can encode up to 2 simultaneous streams to any cloud service, including Datavideo's own DVS-200. The PTC-140TH is compatible with HDBaseT portable studios such as the HS-1500T and HS-1600T and controllers like the RMC-300 and RMC-180. The PTC-140TH includes the HBT-11 HDBaseT Receiver.

HDBaseT Receiver

The HBT-10 HDBaseT transmitter and HBT-11 receiver provide a maximum transmission distance of 100 meters. The pair supports video transmission up to 4K resolutions over Ethernet. With a 48V power source connected to the HBT-11 HDBaseT receiver, the HBT-11 can also remotely power the transmitter using Power over Ethernet (PoE).

The HBT-10 transmitter can power external devices from the 12V/30W DC output. DVIP control can be achieved over the same Ethernet cable. In other words, HDMI video, DVIP control signals and Power over Ethernet (PoE) can be transmitted between the transmitter and the receiver using a single Ethernet cable.

Datavideo PTC-140TH Features

PTZ Camera:

1/2.8 inch CMOS sensor. Up to Full HD with 60fps

20x Optical Zoom, 10xDigital Zoom

Advanced noise reduction

Audio Input Interface

264/H.265 video compression for streaming

Multiple Network Protocol: support RTSP, RTMP protocols and support, easy to link streaming media server

Compatible with HS-1500T and HS-1600T HDBaseT Portable Video Studios and remote controllable by RMC-300 and RMC-180 PTZ Camera Controller

HBT-11 Included

Receiver:

Transmit up to 4K video from HBT-10 Transmitter to HBT-11 Receiver

Extend video transmission up to 100m from HBT-10 Transmitter to HBT-11 Receiver

Transmit video, audio, DVIP Ethernet control, RS-422/232 and POE from a single Cat.5e/6/6a/7 cable

PoE Power supply 48V input from HBT-11 Receiver

12V 30W DC output at HBT-10 Transmitter

Supports DVIP Control Protocol

Supports RS-422/232 Control Protocol